Course Duration
1 Year
Course Level
Level 6 Advanced Craft Certificate.
Course Start Date
September 2017

Course Summary

The electrician is involved in the installation, commissioning, testing and maintenance of various wiring systems and services in domestic, commercial and industrial applications.

#Work ranges from wiring of domestic houses, offices and retail units to more complex systems involving instrumentation, process control and maintenance in industrial plants, hospitals and power stations. Electricians also service, maintain and repair electrical equipment, both domestic and industrial.

Apprentices who successfully complete all 7 phases are conferred with Level 6 Advanced Craft Certificate.

Only holders of a Craft Certificate can be registered as qualified craftsperson. This award is recognised nationally and internationally.

The education and training structure common to all trades delivered at DkIT consists of the following phases:
Phase 1: On-the-job training with the employer (12 weeks)
Phase 2: Off-the-job training with ETB (20 to 22 weeks)
Phase 3: On-the-job training with the employer
Phase 4: Off-the-job training with the Institute of Technology (10 - 11 weeks)
Phase 5: On-the-job training with the employer
Phase 6: Off-the-job training with the Institute of Technology (10 - 11 weeks)
Phase 7: On-the-job training with the employer

The Department is sub-divided into a number of sections that deliver the phase 4 and phase 6 training programmes for the trades of Carpenter-Joiner, Electrican, Motor Mechanic, and Plumber.
Subjects Phase 4 consists of 3 Modules (11 Weeks in total):

  • Module 1 Electricity 2
  • Module 2 Power Distribution 1
  • Module 3 Electronics 1

Assessment at Phase 4 is conducted at the end-of-term.

  • T1 Electrical Science
  • T2 Electrical Craft Theory
  • P1 Panel Wiring
  • P2 Electronic Circuit Construction

Phase 6 consists of 5 Modules (11 Weeks in total):

  • Module 1 Automatic Control
  • Module 2 Access control and Alarm Systems
  • Module 3 Electricity 3
  • Module 4 Power Distribution 2
  • Module 5 Electronics 2

Assessment at Phase 6 is conducted out at the end-of-term.

  • T1 Electrical Science
  • T2 Electrical Craft Theory' T3 PLC Programming
  • P1 Panel Wiring

The apprenticeship system is a modular standards based system generally comprising of 7 alternating phases of on-the-job and off-the-job training and development. These alternating phases of training consist of 3 off-the-job and 4 on-the-job phases.

The duration of the 3 off the-job training phases does not normally exceed 40 weeks.

The off-the-job phases are delivered by a training centre, an Institute of Technology or another approved training provider.

The key factor in delivery of an off-the-job training phase is that it is delivered in a single training environment to ensure the integration of practical training with the necessary theoretical and personal skills.

You will attend Dundalk Institute of Technology for Phase 4 and Phase 6 of the Standards Based Apprenticeship. Both phases last between 10 and 11 weeks.

On-the-Job / Off-the-Job:;

PHASE 1: On-the-Job with the Employer (Minimum 3 months)

PHASE 2: Off-the-Job with Training Centre (Up to 20 Weeks)

PHASE 3: On-the-Job with the Employer (Minimum 6 months)

PHASE 4: Off-the-Job Institute of Technology (10 - 11 Weeks)

PHASE 5: On-the-Job with the Employer (Minimum 6 months)

PHASE 6 Off-the-Job Institute of Technology (10 or 11 Weeks)

PHASE 7: On-the-Job with the Employer (Minimum 3 months);

You will be qualified to work within your chosen apprenticeship field or you may decide to further develop your career i.e. company-based, cross-skilling, up-skilling, management or self-employment.

On successful completion of your apprenticeship you are eligible for consideration for entry into related degree courses provided by various Institutes of Technologies including DkIT, provided you also meet other special entry requirements.

Further information on progression from Advanced Certificate - Craft to levels 7 and 8 are available on the QQI website: 

The Annual Student Contribution is levied on students attending Higher Education. Institutions including Institutes of Technology.

As part of changes included in Budget 2014, apprentices now pay the same contribution as full-time students, but their contribution will be based on the time they spend in the Institutes.

This is typically one third of the Annual Student Contribution paid by students attending for the full academic year but it can be greater for certain trades where longer periods are spent in Institutes of Technology.

The amount due for full-time students for the academic year 2016/2017 which ends in June 2017 is €3,000. The Student Contribution is payable on the date of registration for the training phase.

Please note, a percentage of the Facilities Contribution Fee may also be applicable.

Apprentices must be at least 16 years of age and have a minimum of grade D in any five subjects in the Junior Certificate or equivalent. However, employers may require additional minimum qualifications.

Where individuals do not meet the minimum requirements they may be registered as an apprentice by an employer if:

  • They satisfactorily complete an approved preparatory training course and assessment interview.

For information on these courses please contact your local Employment Services Office


Over 16 years of age with a minimum of three years relevant work experience. This work experience must be in a relevant designated industrial activity as SOLAS shall deem acceptable.

Apprentices must be employed in their chosen occupation by an employer who has been approved by SOLAS. The employer must register the apprentice with SOLAS within 2 weeks of recruitment.

In certain occupations, a vision test is required.

Simon O’Neil (Head of Department of Engineering Trades)
Phone: +353 42 9370276
Email: simon.oneill@dkit.ie

LMETB - Solas Training Centre (Senior Training Advisor)
Phone: +353 42 9355701
Email: recep.rst@lmetb.ie

SOLAS (www.solas.ie)
Phone: +353 1 6070500
Email: info@solas.ie

Apprentices are paid the agreed Industrial Apprentice Wage Rate by the employer (the actual rate paid may vary depending on the occupation and employer). Generally, rates are based on the year and increase during the apprenticeship; details should be checked with the prospective employer.

During off-the-job training, all apprentices are paid an Apprentice Allowance and, where appropriate, a contribution towards travel or accommodation costs.

There are also grants to encourage employers to recruit and register Female Apprentices. 

Course ID N/A
Level 6 Advanced Craft Certificate.
Duration 1 Year
School School of Engineering
Department Engineering Trades and Civil Engineering
Awarding Body SOLAS
Starting Date September 2017
Apply to SOLAS

How to Apply

You can find out more by clicking the button below.

Find Out More